01 / 11

Defend every Load & Sterilize
after the cabinet ships.

A Manufacturer Program concept — your brand on the CUBE tablet, ClarityComply underneath. For company discussion.

Confidential · Concept discussionclaritycomply.com · thestericube.com
The opportunity

SteriCUBE already sells the cabinet. The bay still closes in paper.

Multi-Tray Sterilization is in the field. Load & Sterilize — filters, plates, trays, weight, cycle, seal — still lives in memory and binders while the CUBE sits next to a tablet that could capture it.

Sold

MTS capital

SteriCUBE® cabinets sterilize and deliver multiple trays as one unit — Unwrap Efficiency™.

Gap

Point-of-work proof

IFU steps aren’t guided or attributed to this CUBE in real time.

Ask

Close the loop

Guide Load & Sterilize on the cabinet. Give SteriCUBE fleet visibility after install.

ClarityComply × SteriCUBEOpportunity
Why it matters

Missed IFU steps become load risk — and brand risk.

For the facility
—
Survey asks how the multi-tray load was handled — proof is reconstructed after the fact.
—
Wrong filter, over-capacity, or wrong cycle isn’t caught until it fails.
For SteriCUBE
—
“Was the IFU followed?” falls back on tribal knowledge — not the validation.
—
No continuous engagement between install and the next capital conversation.
The point

The Manufacturer Program makes every Load & Sterilize real-time and defensible — on the CUBE SteriCUBE already sells.

ClarityComply × SteriCUBEWhy
What we propose

Your brand on the floor. Our decision layer underneath.

Guide

Load & Sterilize IFU

Eight validated steps on this CUBE — model, filters, plates, trays, weight, cycle, seal, release.

Capture

CUBE-attributed record

Each session tied to CUBE ID, model, facility, and tech — survey-ready, no PHI.

Defend

Ask + fleet

Exceptions and IFU questions roll to SteriCUBE with model, CUBE, and step attached.

Extends SteriCUBE. Does not replace the cabinet, the IFU, or the customer relationship.

ClarityComply × SteriCUBEProposal
How it works

From the card on the CUBE to the manufacturer portal.

01
Scan CUBE
Tag resolves model + ID
02
Attribute
Name or staff ID
03
Load & Sterilize
Guided IFU gates
04
Release
Survey-ready record
05
Fleet roll-up
SteriCUBE sees the CUBE
Token session · no account · no password · no PHI Co-brand card · ships with the CUBE
ClarityComply × SteriCUBEProduct
Who owns what

Clear lines — so the partnership stays clean.

SteriCUBE
—
Owns MTS capital IP, IFU, filters, validation
—
Sells & supports cabinets; keeps the facility relationship
—
Answers Ask Manufacturer and field support
—
Brand on the card, tablet, and portal
ClarityComply
—
Owns platform IP, decision logic, architecture
—
Powers guided IFU, attribution, fleet roll-up
—
White-labels under SteriCUBE
—
Attributed as Powered by ClarityComply
ClarityComply × SteriCUBEOwnership
What SteriCUBE gains

After the sell — still in the account.

DifferentiateCabinets that ship smart — guided Load & Sterilize competitors can’t attach without the layer.
Defend IFUAttributed proof the validation was followed — not a binder reconstructed after a failure.
EngageContinuous signal between install and re-buy — exceptions, Ask volume, load activity by CUBE.
See the fieldManufacturer portal: which CUBEs, which facilities, loads released, IFU questions with context.
ClarityComply × SteriCUBEValue
See it

Two concept surfaces. Same CUBE loop.

CUBE tablet
—
Scan the card shipped with the CUBE
—
Walk Load & Sterilize — eight IFU gates
—
Ask Manufacturer with step attached
Manufacturer portal
—
CUBEs — active cabinets & facilities
—
Exceptions & IFU questions
—
Support with session context

Concept only — does not claim SteriCUBE currently runs on ClarityComply. No PHI.

ClarityComply × SteriCUBEDemos
Discussion

What we’d explore together.

01

Pilot CUBEs

Tagged cabinets at authorized facilities — Load & Sterilize live, portal login for SteriCUBE ops.

02

IFU ownership

SteriCUBE owns clinical content; ClarityComply encodes gates and attribution.

03

Commercial shape

Attach to new installs and installed base — white-label terms that keep IP lines clear.

Framing

This is a concept for discussion — not a live product claim and not a signed partnership.

ClarityComply × SteriCUBENext
Fit

Built for specialty capital — not a generic SPD tool.

AttributionPrimary key is the CUBE ID — not a loaner tray ID or offsite site code.
WorkflowLoad & Sterilize IFU on Multi-Tray Sterilization — filters through release.
PortalManufacturer view — CUBEs, exceptions, Ask — not a hospital SPD dashboard.
PositionShips with the device story — distribution and adoption in one motion.
ClarityComply × SteriCUBEFit

Make every load defensible.

Guide Load & Sterilize on the CUBE. Capture the record. Give SteriCUBE the fleet view — without replacing the cabinet or the IFU.

Scan the CUBE · Guide the IFU · Defend the Load
ClarityComply × SteriCUBEConfidential · Concept